Article Index

 

Accessories

Rockbreaker accessories range from simple, practical auxiliary kits to advanced automatic lubrication systems, digital health monitoring systems and effective dust suppression systems. Their purpose is to enable the tool system to be tailored to meet different demands in different applications and working environments, and to optimize the system to give higher productivity, even greater reliability and reduced operating costs, with minimal environmental impact.

 

   

AGW -  Air, Grease & Water

The AGW (Air, Grease & Water) service box is designed to be mounted on any excavator, to act as a mobile service unit for any Rammer Rockbreaker, supplying Air, Grease and water. 

 The Rammer AGW Service Unit is capable of supplying a steady flow of:

  • Air - for added dust protection
  • Grease - automatic greasing of the hammer increases the hammers life span and reduces wear.
  • Water - for added dust protection.
  agw boxi auki 
Automatic lubrication systems - RamLube I, RamLube II and RamLube III 

Automatic lubrication system designed to ensures a long, trouble-free life specifically for hydraulic rockbreakers.

Ramlube I kit can be used for lubricating all the rockbreaker tools. Small rockbreakers might need an electronic timer to limit the amount of grease. Big rockbreakers and breakers with two greasing points need, in some cases, another pump element.

The pump unit is electrically operated. The high operation pressure, 300 bar max. makes it possible to use greases up to NLGI 2-class.

Ramlube II greasing device can be installed on all Rammer Large Range rockbreakers. The kit consists of a greasing device, hoses and a mounting plate tailored for different rockbreaker models.

The greasing device is operated by the hydraulic pressure from the rockbreakers's pressure fitting. The unit is installed to the rockbreaker's housing with a mounting plate and no external electric cables or hydraulic hoses are needed. Ramlube II contains a replaceable 500-gram grease cartridge.

Ramlube III is an integrated lubrication device mounted inside the rockbreaker’s housing on the power cell, it provides maximum lubrication whilst only using minimum grease amount, prolonging the tool and bushing life. The location of Ramlube III also provides full protection of moisture and dust.

   Hammermaintenance RamLubeII
 
Ramona

The Ramona monitoring analyzer is used to analyze rockbreaker operation and performance. It utilises advanced electronics within the rockbreaker hydraulic system to deliver up-to-the-minute condition and performance data to the operator, identifying abnormalities in operating conditions and pre-empting potential failures before they occur.The system also stores statistical information for further analysis and warns and guides the operator for better operating habits.

By monitoring hydraulic oil temperature, rockbreaker operating pressure and blow frequency, Ramona can also be connected to our systems to inform us of rockbreaker malfunctions and impending problems.

Ramona instrumentation consists of the analysis unit, transmitter and Ramcom software and can be accessed by modem via SMS text messaging, computer or direct cable connection. 

   Ramona
 
Ramdata

Ramdata II uses advanced electronics to sense the impacts, and stresses on the rockbreaker. It is a service indicator device designed to help operators and service personnel to get information about the service interval status, service history and accumulated working history of a rockbreaker.

Ramdata II is a standard feature of the 3288, 4099 and 5011. 

   RamData
Ramair

The Ramair air flush system is designed to prevent dirt from entering the rockbreaker housing and keep the tool grease flowing towards the lower tool bushing.

It's most beneficial in applications where the material is highly abrasive and dusty. Ramair is also recommended for applications where the rockbreaker working position is horizontal or above, such as tunneling and scaling applications.

  ramair
Special Tool Grease

Tool grease is an essential when using most hydraulic hammers, it needs to withstand high temperatures and pressure. Rammer Special Tool Grease does just that, it keeps on working and keeping your hammer working when ordinary tool greases have melted away.

 

To order Tools, Parts or Grease call us on 1300 921 498 or email This email address is being protected from spambots. You need JavaScript enabled to view it.

   toolgrease 2

 

 

124