Avoid increasing tip fees - crush and recycle the construction and demolition waste onsite

Simex Crusher Buckets Turn Waste Into Usable Material

Simex Crusher Buckets are designed to reduce the volume of aggregates directly on site. With the Simex Crusher Buckets you can turn crushable waste material such as bricks, concrete, glass, reinforced concrete, natural aggregates, tiles, asphalt slabs into usable material on your construction/demolition site. 

With a lightweight structure the crusher bucket won't transmit vibrations to the prime mover or the operator and wide mouth, shaped as standard bucket makes it easy to discharge the crushed material in suitable location on site or load directly into the back of a waste disposal truck.

The rotor system is ideal for crushing reinforced concrete and demolition waste and is not affected by the presence of iron, rock, earth, deformable parts and wet or humid products or sticky materials such as clay, wood and plastic. Crushing teeth are easy to change to produce the crushed material in different-sized pieces: 0-50/100mm (parts for special sizes available on request).

Simex CBE crusher buckets are easy to manoeuvre, even in small and confined worksites and the mountable crusher bucket models are available for excavators and backhoe loaders of 7 - 55 tonnes.





  • Rotor system with teeth driven by hydraulic piston motors in direct drive  -->  Exceptional cutting force enables crushing of any material Not affected by the presence of earth, wet or humid material, or iron rods
  • Drum design and wide mouth  -->  Operating speed and efficiency
  • Valve permitting continuous rotor rotation and an automatic system that inverts drum rotation in case of blocking  -->  Minimised down time with immediate resumption of work without any operator intervention
  • Teeth with large anti-wear surface  --> increased protection and working life
  • Simple, quick teeth replacement  -->  Minimised down time and ability to produce the crushed material in different-sized pieces

"I am amazed in the efficiency we have achieved with the crusher bucket; it can handle a large amount of material and if the builder cannot use the material on site we still take it to the tip but with improved efficiency, as the crushed material takes up less space than uncrushed, utilising the full capacity of the truck...READ MORE.

- John Rystenberg

Recommended excavator weight * (t) 8-12 10-18 16-25 24-40 38-55
Mouth width (mm) 1050 1250 1500 1710  2200
Total width (mm) 1250 1485 1700 1960 2440
Rotor width (mm) 720 735 915 960  1290 
Bucket Capacity (SAE) m3 0.40  0.60  0.80  1.00  1.80 
Number of teeth 10 
Max cutting force (kN) 80  95  125  152  190 
Bucket weight empty ** (kg) 880  1320  2170  2900  4640 
Required oil flow (l/min) 80-160  100-190  150-250  200-350  300-550 
Required oil pressure (bar) 350-230  350-230  350-230  350-230  350-230 

 * The maximum operating load permitted for the excavator, when added to the weight of the standard bucket, must match or exceed the weight of the crusher bucket at full load. User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.  

** Without mounting bracket



 Volvo210CBE40 small  TeethReplacement trans  CB small
 Simex CBE production  Simple and quick teeth replacement  The Simex CB range of crusher buckets can also be mounted on skid steers and other loaders offering a perfect solution when space is limited